Generation Lighting Tybee Outdoor Wall Lantern
Our Tybee outdoor wall lantern draws inspiration from nautical heritage while delivering modern performance for today’s coastal and traditional homes. The fixture pairs beveled clear glass with a structured metal frame, creating definition and shadow play that enhances your exterior architecture after dark.
Tybee ships in two powder-coated finishes that resist fading and corrosion through years of outdoor exposure. Our Matte Black finish delivers contemporary contrast against white trim and light-colored siding, while Antique Bronze provides warmth that pairs naturally with wood doors and stone accents.
Installation requirements & mounting
The Tybee lantern mounts to standard 4-inch octagonal or round junction boxes rated for exterior use. We include a universal crossbar that adapts to most box configurations, along with all necessary screws and wire nuts for a complete installation.
Junction box preparation
Before mounting, verify your junction box is securely anchored to structural framing and sealed with weatherproof caulk where it meets the siding. The fixture weighs 4.2 pounds fully assembled, well within the load rating of properly installed exterior boxes. Route your supply wiring through the rear knockout, leaving at least six inches of conductor for connection. Our installation guide includes diagrams for both new construction and retrofit applications where you’re replacing an existing fixture.
Lamp compatibility & light output
Tybee accepts one medium-base (E26) bulb up to 100 watts, giving you flexibility to choose incandescent, CFL, or LED sources based on your preferred light quality and energy efficiency. We recommend LED A19 bulbs in the 9-13 watt range, which deliver 800-1100 lumens while drawing minimal power.
The clear beveled glass transmits approximately 92% of the bulb’s output, creating bright illumination for safe navigation while the geometric facets add visual interest to the light pattern. For warm ambient lighting, select bulbs in the 2700K-3000K color temperature range. If you need higher output for security or task lighting, 5000K daylight LEDs provide crisp visibility without the harshness of bare bulbs.
Fixture specifications & installation details
Complementary outdoor wall lanterns from our collection
Customer reviews
Questions about the Tybee outdoor wall lantern
The Tybee accepts standard medium-base LED, CFL, or incandescent bulbs up to 100 watts. We recommend 9-13 watt LED A19 bulbs in the 2700K-3000K range for warm ambient lighting that complements the clear beveled glass. These provide 800-1100 lumens of output while maximizing energy efficiency for fixtures that operate nightly.
Yes, Tybee carries a wet-location rating for full exposure to rain, snow, and irrigation spray. The fixture uses silicone gaskets to seal the glass panels and prevent water intrusion. The open-bottom ventilation design allows any moisture that enters to evaporate naturally, preventing condensation buildup inside the lantern.
The fixture extends 7.75 inches from the wall surface when properly mounted. This provides adequate clearance for the bulb and allows light to spread both upward and downward along the wall. The projection works well for most residential applications without protruding excessively into walkways or porch areas.
Tybee ships in two powder-coated finishes: Matte Black and Antique Bronze. Both finishes use multi-stage coating for superior corrosion resistance and UV stability. Matte Black provides modern contrast against light-colored exteriors, while Antique Bronze delivers warmth that complements traditional and coastal home styles.
Each fixture includes a universal crossbar that adapts to standard 4-inch round or octagonal junction boxes, along with mounting screws, wire nuts, and all necessary hardware for installation. The package also contains detailed instructions with diagrams for both new construction and retrofit applications on existing junction boxes.
Clean the glass twice yearly using a soft cloth dampened with mild detergent solution. Avoid abrasive cleaners or rough sponges that can scratch the beveled surfaces. For thorough interior cleaning, you can remove the glass panels annually by loosening the retaining clips, then wipe down both sides and check the gaskets for wear or debris.
The fixture measures 10.75 inches in height, 6.5 inches in width, and extends 7.75 inches from the wall. This compact footprint works well on single-story homes, entryways, and covered porches where you need substantial illumination without an oversized lantern that dominates the façade.