Generation Lighting Chandeliers | Modern & Traditional Designs
Our Bellini chandelier brings timeless elegance to dining rooms and entryways with hand-cut crystal accents and a warm oxidized bronze finish. Each fixture features six 60-watt candelabra bulbs that refract light through precision-cut crystals, creating ambient sparkle across walls and ceilings.
We build every Generation Lighting chandelier with powder-coated steel frames that resist corrosion and chipping over decades of daily use. Our crystal-accented models use lead-free glass components cut to precise angles, ensuring consistent light refraction across every fixture.
Sizing & Ceiling Compatibility
Chandelier diameter should measure one-half to two-thirds the width of your table or room, measured in feet converted to inches. A 12-foot dining room suits a 24- to 32-inch fixture, while entryways often accommodate larger statement pieces up to 40 inches wide.
We design our chandeliers with adjustable hanging systems that work with ceiling heights from 8 to 20 feet. Standard installations place the bottom of the fixture 30 to 36 inches above a dining table, or 7 feet above finished floor level in open spaces. Sloped-ceiling adapters ship with most models, allowing installations on vaults up to 45-degree pitch.
Bulb Compatibility & Light Output
Most Generation Lighting chandeliers accept E12 candelabra or E26 medium-base bulbs, allowing you to choose LED, incandescent, or halogen sources based on your dimming setup and color temperature preference. We recommend 2700K warm white LEDs for dining spaces and 3000K for kitchens where task lighting matters.
Total lumens depend on bulb count and wattage—our six-light models produce 3,000 to 4,800 lumens with 60-watt-equivalent LEDs, enough for primary room illumination in spaces up to 200 square feet. Dimmable LEDs require compatible wall switches; older rotary dimmers may cause flickering with low-wattage bulbs.
Design & build highlights
Chandelier Styles From Our Collection
Customer reviews
Common Questions About Generation Lighting Chandeliers
Measure your room or table width in feet, then multiply by 2.5 to 3 for the ideal fixture diameter in inches. For example, a 10-foot room suits a 25- to 30-inch chandelier. If hanging over a table, leave at least 6 inches of clearance on each side to avoid head bumps when people are seated.
Ceiling height also matters—standard 8-foot ceilings work best with fixtures 20 to 24 inches tall, while 10-foot ceilings can accommodate 30-inch or taller designs. Adjustable chain systems let you customize the drop to achieve the recommended 30 to 36 inches above your table surface.
We recommend hiring a licensed electrician for safety and code compliance, especially if you’re replacing a different fixture type or working with outdated wiring. Chandeliers require secure ceiling support, proper grounding, and correct wire connections that affect both function and fire safety.
If you have electrical experience and your local codes permit homeowner installation, our fixtures include detailed instructions and all necessary mounting hardware. You’ll need a helper to support the chandelier’s weight during installation, plus basic tools like wire strippers, a voltage tester, and a ladder.
Yes, most of our chandeliers are dimmable when paired with compatible bulbs and dimmer switches. LED bulbs require electronic dimmers specifically rated for LEDs, while incandescent bulbs work with standard rotary or slide dimmers.
Check the dimmer’s wattage capacity against your total bulb wattage—a six-bulb chandelier with 60-watt bulbs needs a dimmer rated for at least 360 watts. Smart dimmers offer app control and scheduling, though some budget models cause LED flickering. We recommend Lutron or Leviton dimmers for reliable performance.
Turn off power at the breaker and allow bulbs to cool completely before cleaning. Spray a lint-free microfiber cloth with glass cleaner—never spray the fixture directly—and wipe each crystal individually while supporting it from behind to prevent stress on the metal hooks.
For stubborn grime, mix one part white vinegar with three parts water as a gentle cleaning solution. Dry crystals immediately with a clean cloth to prevent water spots. Some homeowners remove all crystals for deep cleaning in a basin, labeling each strand’s position with masking tape for easier reassembly.
Candelabra sockets (E12 base) are smaller and typically used in traditional chandeliers with flame-shaped or torpedo bulbs. Medium-base sockets (E26) accept standard household bulbs and are common in contemporary or farmhouse-style fixtures.
Candelabra bulbs usually max out at 60 watts each and offer decorative shapes, while medium-base sockets accommodate higher-wattage bulbs up to 100 watts. Both types are available in LED versions, and the socket type is listed in each chandelier’s specifications to ensure you purchase compatible bulbs.
Most Generation Lighting chandeliers include sloped-ceiling adapters for installations up to 45-degree pitch. The adapter mounts between the ceiling junction box and the chandelier canopy, allowing the fixture to hang plumb while the canopy sits flush against the angled ceiling.
For steeper slopes or cathedral ceilings exceeding 20 feet, you may need extended downrods sold separately. Measure from the ceiling peak to your desired hanging height, then subtract the chandelier’s chain length to determine how much additional rod you need. Always confirm the ceiling box is rated for the fixture’s weight and securely fastened to structural framing.
Warranty terms vary by collection—most fixtures include a limited one- to five-year warranty covering manufacturing defects in materials and workmanship. We replace or repair defective components at no charge when you provide proof of purchase and follow the included installation instructions.
The warranty does not cover damage from improper installation, use of incorrect bulbs, or normal wear like finish patina. Register your chandelier within 30 days of purchase to activate extended warranty benefits and receive maintenance reminders. Detailed warranty terms are included in the product packaging and available on our website.